Abilene (325) 668-2226
Pump Service in Winters, TX

Abilene Local

Pump Service in Winters, TX

40 years of oilfield pump expertise, serving Runnels County operators from our Abilene base.

Request an estimate

Tell us what you need

No obligation


By submitting this form you agree that we may contact you about your request and share your name and email address with partner companies for email marketing. We never share your mobile number or text message consent with third parties or affiliates for marketing or promotional purposes.

Pump Service Winters Operators Rely On

Richardson Pump Service Inc provides oilfield pump service in Winters, TX, specializing in progressing cavity pumps, wellhead drives, and artificial lift systems for oil and gas operators throughout Runnels County. Sam Richardson has been doing this work since 1985-40 years in the trade, and when you call (325) 668-2226, you reach the specialist, not a dispatcher. If you've got a well down near Winters, that's the call to make.

Winters sits in Runnels County, where the City of Winters itself draws drinking water from five wells tapping two aquifers at depths ranging from 158 to 630 feet, a reminder that this part of West Texas runs deep, and so does the mechanical complexity of keeping downhole equipment working. The clay-heavy soils common across this region expand and contract with moisture, which can stress wellhead components and surface equipment over time. We service operators in the Winters area and throughout the surrounding region, including nearby communities like Stamford and Cross Plains.

What Winters Operators Ask Us to Fix

Most calls from the Winters area fall into a short list of recurring problems.

Progressing cavity pump failures, worn wellhead drive components, and VFD control issues account for the majority of service calls we handle in this part of West Texas. Clay soils in Runnels County put lateral stress on surface equipment that flat-ground operators elsewhere don't see as often. Downhole, the aquifer depths around Winters, some wells pulling from below 600 feet, mean rotor and stator wear shows up on a predictable schedule if the pump was sized wrong at installation. We've seen what happens when a pump runs outside its design envelope. It's not pretty, and it's not cheap. Call us before it gets to that point.

wellhead drives work, illustration in Winters, TX

Our Capabilities

Artificial Lift Services We Bring to Winters

We work across brands and systems, not locked to one manufacturer.

Downhole PCP Systems

We select, size, install, and service progressing cavity pumps from PCM, Weatherford, Artemis, and SLB - Oil Lift. Proper sizing for your fluid gravity and depth is the job. A wrong selection costs you run time.

Wellhead Drives

Surface drive units take a beating in West Texas conditions. We service and replace wellhead drives across major brands, and we stock components that keep your wait time short.

VFD Controls and Automation

Variable frequency drive retrofits and automation upgrades from SPOC and NETCO reduce power consumption and extend pump run life. If your current setup is running flat-out with no speed control, that's a fixable problem.

Failure Analysis

We don't just pull a failed pump and hand you a new one. We tell you why it failed. That's what stops the same failure from repeating 90 days later at full replacement cost.

Fluid Level Services

Fluid level testing tells you what's actually happening downhole. It's how we confirm a pump is properly loaded and how operators catch production problems before they become pump problems.

Maintenance Programs

Scheduled maintenance on PCP systems in Runnels County pays for itself in deferred production you don't lose. We can build a program around your well count and production schedule.

Local Context

Why Runnels County Wells Need Specialist Attention

The geology around Winters is not forgiving. The City of Winters draws from two aquifers, with well depths ranging from 158 to 630 feet, and producing formations in this part of Runnels County can sit even deeper. That depth range means rod string loads and fluid column pressures that will shorten a PCP's run life fast if the rotor-stator fit isn't matched precisely to actual downhole conditions. We've also seen clay soil expansion put enough side load on surface equipment to accelerate bearing wear in drive units. These aren't textbook problems. They're what actually happens in this area. Getting a specialist who knows West Texas well conditions is different from calling a general pump shop that treats every job the same.

downhole pcp systems work, illustration in Winters, TX

How We Work With Operators Near Winters

No call centers. No handoffs. Sam Richardson handles your account directly.

We don't route Winters-area calls through a regional office or hand jobs off to a subcontractor. When you call (325) 668-2226, you talk to someone who knows PCP systems, knows West Texas well conditions, and can give you a straight answer on what your well needs. That's what 40 years of oilfield work gets you. We work with operators from Tuscola and Clyde to Ovalo and across Runnels County, so the Winters area is territory we know. Every job gets the same accountability, owner-operated means there's no layer of management between you and the person responsible for the outcome. If you're comparing vendors, that's the real difference.

failure analysis work, illustration in Winters, TX

Service Area Around Winters, TX

Richardson Pump Service covers Winters and the surrounding Runnels County area, as well as oil and gas operators throughout West Texas, New Mexico, Oklahoma, and Indiana.

Ready to Talk About Your Winters-Area Well?

Winters operators: one call reaches the specialist.

Direct line to Sam

(325) 668-2226

Based in Abilene, TX

Frequently asked questions

Question not here?(325) 668-2226

Ask Sam directly.

Does Richardson Pump Service work with operators in Winters, TX?
Yes. We service oil and gas operators in Winters and throughout Runnels County. The drive from our Abilene base puts us well within range for both scheduled maintenance and urgent service calls. Sam Richardson handles Winters-area accounts directly. Call (325) 668-2226 to discuss your well.
How often should a PCP system near Winters be serviced?
It depends on fluid composition, pump speed, and downhole conditions, but for wells in the Winters area drawing from deeper formations, we'd typically recommend a formal inspection every 6 to 12 months at minimum. Clay soil conditions in Runnels County can accelerate surface drive wear, so wellhead components often need attention on a tighter cycle than operators expect. Contact Richardson Pump Service for an assessment specific to your well.
What causes progressing cavity pump failures in West Texas wells?
The most common causes we see are rotor-stator mismatch for actual downhole conditions, running the pump outside its designed speed range, abrasive solids in the fluid stream, and gas interference. Wells in the Winters area pulling from deeper aquifer zones can develop fluid level issues that starve the pump and cause dry-run damage fast. A fluid level test before you size or run a replacement pump is never wasted money. Every job is different. Contact Richardson Pump Service Inc for an accurate estimate.
Can a failed pump near Winters be repaired instead of replaced?
Sometimes. It depends entirely on what failed and why. A worn stator can be replaced without pulling the rotor. A sheared rod string is a different conversation. We won't push a replacement if a repair is the right call, but we also won't put a patched pump back in a hole that's going to fail it again. That's why failure analysis is part of how we work. Call (325) 668-2226 and describe what you're seeing.
Do you service VFD controls and automation systems for Winters-area wells?
Yes. We work with SPOC and NETCO VFD systems and can handle automation retrofits on existing wellhead setups. Variable frequency drives are one of the most cost-effective ways to extend PCP run life and cut power costs, especially on wells in Runnels County that are running at fixed speed with no downhole protection. We can evaluate your current setup and tell you whether an upgrade makes financial sense for your production.
What brands does Richardson Pump Service work with in the Winters area?
We're not locked to one manufacturer. For downhole PCPs we work with PCM, Weatherford, Artemis, and SLB - Oil Lift. For surface drives and controls we work with NETCO, SPOC, and Martin. That multi-brand capability matters when you're running mixed equipment across several wells in Runnels County, you get one accountable vendor instead of multiple reps pointing fingers at each other.

Related

Next step

Tell us about the job

Your name, your number and what needs doing. A person from Richardson Pump Service Inc gets back to you.

Rather talk now?(325) 668-2226

No obligation


By submitting this form you agree that we may contact you about your request and share your name and email address with partner companies for email marketing. We never share your mobile number or text message consent with third parties or affiliates for marketing or promotional purposes.