Abilene Local

Pump Service in Avinger, TX

Progressing cavity pump and artificial lift specialists serving East Texas operators since 1985.

Request an estimate

Tell us what you need

Pump Service Avinger Operators Rely On

Richardson Pump Service Inc delivers oilfield pump service in Avinger, TX, specializing in progressing cavity pumps and artificial lift systems for oil and gas operators across East Texas. Sam Richardson has worked on PCP systems for 40 years, and every service call that goes through our shop gets his direct attention. If you've got a well down or a pump that's not performing, call (325) 668-2226 and talk to someone who can actually diagnose the problem, not just take a message.

Avinger sits in Cass County, where heavily timbered sandy loam soil presents real challenges for subsurface installations and downhole equipment. The area's water supply runs through the Northeast Texas Municipal Water District's regional treatment plant out of Lake O' the Pines, and the municipal water in this part of East Texas can trend toward harder mineral content. For operators running artificial lift in this region, equipment selection and proper maintenance matter more than most people account for. We service operators across East Texas from our base in Abilene, and we've built long-term relationships with production teams who need a PCP specialist they can actually reach.

PCP Expertise Serving the Avinger Area

Most pump service outfits in East Texas are general contractors who picked up artificial lift as a sideline. We're not that. Richardson Pump Service was built around progressing cavity pumps from day one, and that's still the core of what we do. We work across the major PCP brands, including PCM, Artemis, Weatherford, and SLB Oil Lift, which means we're not locked into one manufacturer's solution when you've got a problem downhole in Avinger. If a competitor quotes you a full pump replacement before running any diagnostics, ask them when they last did a failure analysis. We do that work before we recommend anything. Operators in the Avinger area can call Sam directly at (325) 668-2226 to discuss what's happening with their system.

Wellhead valve assembly and pressure gauge equipment at an active oil extraction site, with a pump jack visible in the background.

What We Cover

Artificial Lift Services for East Texas Wells

We handle the full scope of progressing cavity pump and artificial lift work, from initial design to ongoing maintenance and failure investigation.

Downhole PCP Systems

Pump selection, installation, and pullout service for progressing cavity pumps in oil and gas production wells. We spec the right pump for your fluid conditions, not the one that's easiest to source.

Wellhead Drives and VFD Controls

Surface drive installation and variable frequency drive setup for PCP optimization. SPOC and NETCO systems are part of our regular work. Proper VFD tuning extends run life and cuts deferred production.

Failure Analysis

When a pump fails, we find out why before we put another one in. Sand intrusion, elastomer swell, rotor wear, improper speed, wrong pump sizing for fluid load. Each of these has a different fix, and guessing costs you the next pump too.

Fluid Level Services

Acoustic fluid level testing tells you what's happening downhole before you pull the pump. It's one of the clearest diagnostics available, and it drives smarter decisions on pump sizing and drawdown management.

Pump Maintenance Programs

Scheduled maintenance keeps run life up and emergency calls down. We work with operators who prefer a planned approach to artificial lift rather than waiting for a failure to shut production in.

East Texas Conditions

Sandy Soil and Hard Water Create Real Pump Challenges

Cass County's sandy loam soil erodes under sustained fluid movement, which affects how subsurface equipment behaves over time. If you're seeing increased solids in your produced fluid, that's worth understanding before it shortens your next pump's run life significantly. Avinger's water supply comes from a surface source treated at a regional facility, and the mineral content in this part of East Texas can be substantial. Hard water accelerates wear on elastomers and can affect pump performance in ways operators sometimes attribute to the wrong cause. We don't guess. Our failure analysis process looks at pulled equipment and produced fluid data together, so we can tell you whether you've got a solids problem, a fluid composition problem, or a surface drive issue. That distinction matters. Explore the kind of diagnostic work we do by reviewing our gallery of field equipment and installations. Operators in nearby communities like Stamford and Baird face different formation conditions, and we tailor our approach accordingly for each area we serve.

Submersible pump system with motor, control panel, and piping installation illustrated with operational monitoring icons for water, temperature, security, time, mechanical function, and energy efficiency.

How We Work With Operators

Direct Call to Sam

Call (325) 668-2226 and reach Sam Richardson directly. No call center, no dispatcher, no handoff to a crew who doesn't know your well's history. You talk to the specialist from the first call.

Diagnosis Before Recommendation

We run the diagnostics first. Fluid level testing, failure analysis on pulled equipment, and a review of your production data before we recommend a pump, a size, or a drive configuration.

Installation and Follow-Through

We handle installation, VFD commissioning, and post-install monitoring. The job isn't done when the pump goes in. It's done when production is stable and we've confirmed the system is running correctly.

Brands We Work With in the Field

Multi-brand capability means we solve the problem with the right equipment, not whatever we happen to stock.

We're not a single-manufacturer shop. That matters when you've already got PCM equipment on some wells and Weatherford on others.

PCM progressing cavity pumps: Full service and selection support
Artemis and SLB Oil Lift systems: Downhole and surface components
SPOC and NETCO wellhead drives: VFD commissioning and automation
Weatherford and Martin equipment: Cross-brand maintenance and failure analysis

In the field

A look at our work

Submersible pump system with motor, control panel, and piping installation in an industrial oil and gas field setting.

Submersible well pump system with electric motor and control panel installed in an underground borehole, illustrated with performance gauge and torque detail.

Reach Richardson Pump Service From Avinger

Well down? Production dropping? Call Sam before it costs you another pump.

Direct line to Sam

(325) 668-2226

Based in Abilene, TX

Call now Request an estimate

Frequently asked questions

Question not here?(325) 668-2226

Ask Sam directly.

Does Richardson Pump Service work in Avinger, TX?

Yes. We serve oil and gas operators in Avinger and the broader Cass County area. Avinger is in East Texas, and while our home base is in Abilene, we work with production teams across Texas who need a PCP specialist they can reach directly. Call Sam at (325) 668-2226 to discuss your well's situation.

What kind of pump problems do you handle for Avinger area wells?

Primarily progressing cavity pump failures, poor production performance, and artificial lift system issues. We also do wellhead drive service, VFD troubleshooting, and fluid level diagnostics. If you're pulling a pump that failed early or seeing a steady decline in production from a PCP well near Avinger, those are both situations we're built to work through.

Cass County has sandy loam soil. Does that affect pump selection or run life?

It can. Sandy soils in East Texas are associated with higher solids in produced fluids, which accelerates wear on PCP elastomers and rotors. Selecting the right stator elastomer hardness and setting appropriate pump speed for your fluid load are both factors that matter more in sandy formation areas. We account for that during system design and during failure analysis on pulled equipment.

How do you determine why a progressing cavity pump failed on an Avinger well?

We inspect the pulled pump components and cross-reference with production data, fluid samples, and your run history. Common causes we see include improper pump sizing for actual fluid rate, sand or solids intrusion, elastomer swell from fluid chemistry, and surface drive problems that were never identified as the root issue. Replacing a pump without that analysis usually means the next one fails the same way.

Which PCP brands do you service for operators in East Texas?

We work with PCM, Artemis, Weatherford, SLB Oil Lift, and Martin downhole equipment, along with SPOC and NETCO surface drives. If you have existing equipment from one of those manufacturers on your Avinger lease, we can service it, pull data from it, and make recommendations without asking you to switch brands. Every job is different. Contact Richardson Pump Service for an accurate assessment of your system.

Can you help with VFD and automation for a PCP well near Avinger?

Yes. Variable frequency drive setup and automation are a regular part of our work. SPOC and NETCO drives are systems we commission and troubleshoot in the field. Proper VFD tuning for a progressing cavity pump extends run life and reduces the risk of rod failures from improper torque loading. It's not a set-and-forget item, and we treat it accordingly.

Next step

Tell us about the job

Your name, your number and what needs doing. A person from Richardson Pump Service Inc gets back to you.

Rather talk now?(325) 668-2226